home ... previous article ... next article
DP4Remote
— An application for the iPhone® and iPod Touch®.
This unique application offers the possibility to remote control a single XTA Electronics 4-Series Loudspeaker Management System from your iPhone® or iPod touch®.
DP4Remote
The DP4Remote is designed as a mobile addition to XTA Electronics® AudioCore®. It offers the possibility walking around the venue to adjust your system with nothing more to carry than your iPhone®. It may also be used as a backup for your system notebook.
The Overview Screen gives you instant information
about your device. It shows the channels routing as well
as their names. The corresponding ganged channels are
marked with the same color. At this place you can refresh
your iPhone® with the connected devices data.
The bottom toolbar gives you access to the individual
pages for setting routing, ganging, names and the wireless
connection settings as well as to the memorys.
By tapping a channels name you go directly to the selected
channel's edit page.
The Edit Screens are designed for the most easy access
to the selected channel or ganginggroup's parameters. By
swiping with your fingers you can change between the
different groups.
They are seperated in four different function-blocks which
are selected by the bottom toolbar.
The Crossover Screen gives you access to Gain, Mute,
Phase, Delay and High- and Lowpass Filters.
On the EQ Screen you may change
the parametric EQs parameters.
By turning your iPhone® left the
Graphic-EQ-Screen is displayed.
There you can set all filters as well
as the behavior of your EQ (GQ-600 / Special). By turning
the device back to portrait-mode you return to the parametric
EQs.
Finally the Limiter-Screen gives you the possibility to
change the RMS and Clip Limiters in attack, release and
threshold.
DP4Remote
- syncs with the device in both ways.
- setting in advance or get the controllers current data.
- stores your offline edited data for later sync with your device when closing
the application.
- is compatible with XTA Electronics® DP448®, DP446®, DP444® controllers.
Important Notes:
- You will need a working wireless connection to your controller (tested with XTA Wiser2400® and Moxa N-Port 5110®).
- DP4Remote is a third party application (this means this application is not developed by XTA Electronics®).
- DP4Remote will work on any iPhone® / iPod touch® with iPhone OS 3.13 or higher. Recommended devices are iPhone 3G® / 3GS® and iPod touch 2G® and higher.
home ... previous article ... next article